Centaurpede
Dominic Rivron
Centaurpede
image (169 KB)
This image was originally printed on cards measuring 800mm x 1400mm.
To create a version of Centaurpede, 50+ cards are required. It may be
necessary to trim the left hand edge
after printing so that the image begins at the edge of the card, as it
is difficult to print without a left hand margin.
Once printed, the cards are arranged in an overlapping spiral: the
cards are carefully positioned so that the image appears to be
continuous. One or two centaurs should be visible on each card. A curve
should be maintained and sharp turns avoided. The cards
can be pinned to a surface or glued together.
Centaurpede constructed >>>